CAMPAGNOLO FRONT HUB User Manual download pdf (Page 22)

Rear hub ﬁnal

reassembly

Apply1 to 2 mL of oil onto

helical splines on drive ring.

Apply a drop of light chain

lube (Tri-Flow™, etc) onto

both O-rings on axle and O-

ring on QR adaptor. Apply

a thin layer of grease onto

clean threads on adjusting

clamp and adjusting clamp

2.5 mm hex screw.

Insert driveshell into the hub

shell; turn in a clockwise motion while letting it pull itself in. A distinctive click sound

will indicate that the driveshell is ﬁrmly seated.

Shimano®/SRAM® Axles.

Slide cleaned, relubricated

outer driveshell bearing (laser

marked “C” on bearing) onto

main axle with snap ring

facing out toward driveside.

Campagnolo® Axle. Slide

cleaned, relubricated outer

driveshell bearing (laser

marked “B” on bearing from

drive side on to main axle with

snap ring facing out toward

driveside. Press on retainer

sleeve from drive side.

Insert main axle, threaded

(non-driveside) end ﬁrst into

driveshell. Continue until

axle is through the hub and

driveside end is ﬁrmly seated

in driveshell.

Thread adjusting clamp onto

the protruding threads on the

non-driveside of axle.

Insert R45 QR insert into

non-driveside axle end.

Snug adjusting clamp up to

bearing.

4. Shimano®/S RAM® Axle and Bearing

assembly

5. Campagnolo® Axle and Bearing assembly

1 2 ... 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

CAMPAGNOLO FRONT HUB User Manual Page 22

Comments to this Manuals